Many people wonder how to do shutter painting. There are many ways to go about it. Here are some tips to get you started. Make sure you have adequate time to complete the project. Before you start, you will need painter’s tape, primer, and acrylic latex paint. If you do not know what all these items are, check out our handy how-to guide. Read it over, and you will soon be well on your way to a new and improved shutter.
Painter’s tape
Before starting a new painting project, it is a good idea to clean your surfaces well. Dirty surfaces are more difficult to adhere to painter’s tape, which can result in leaks or infiltration of paint underneath. To prepare your surfaces, use a mild detergent and water to clean them thoroughly, then allow them to dry. Before removing painter’s tape, make sure to remove the drop cloths.
Sanding
If you’ve ever considered refinishing your shutters, you probably know how important it is to sand them thoroughly. Shutters provide protection against weather, privacy, and break-ins, but they also add an eye-catching look to a home. But shutters often need renovation due to weather damage. This guide will help you learn the basics of sanding shutters. Using a sandpaper with 50-grit, you can prepare the shutters for staining. A few more rounds of sanding will probably be necessary to achieve a smooth finish.
Primer
Before you begin painting your shutters, it is important to prime them with an exterior latex primer. Most primers are white so they will not interfere with heat absorption. Primers also have a higher bonding strength than topcoats, making them an excellent choice for shutter painting. Also, primer will prevent repainting if it begins to peel or discolor after drying. After you apply your shutter primer, you should sand your shutters with 220 grit sandpaper.
Acrylic latex paint
When applying paint to your shutters, you’ll want to be sure to follow some basic steps to make sure the paint will adhere well. Start by cleaning the shutters thoroughly and ensuring that there is no existing paint damage. Use Glidden Primer or a similar product to make sure the paint adheres to the shutter’s surface. You should then choose a paint that is 100% acrylic latex and either a satin or semi-gloss finish. Depending on your preference, you’ll need between one and two coats of paint.
High-gloss finish
The best paint for plastics and vinyl applications is acrylic latex paint. For shutters, you may want to use a latex primer. This may not be necessary, but will ensure that the paint adheres to the shutter properly. Most paints are re-coated within 20 minutes. For best results, apply the paint in small, even bursts. A high-gloss finish makes your shutters look more modern.
Vinyl shutters
It is not necessary to repaint vinyl shutters, but it does require some preparation before painting. Cleaning the shutters with household bleach or degreaser will remove any dirt or grime. If the vinyl is painted on a previous basis, lacquer thinner can be used to remove the old paint. Apply this solution to a rag or paper towel and scrub the shutters without damaging the finish. Use a soft bristle brush to remove any excess paint.
Tracked shutters
Tracked shutters are a great way to control the temperature of your home, as well as block harmful UV light. This type of shutter is often used in high-traffic areas, such as bathrooms and kitchens. Tracked shutters are also strong and durable, which makes them a great option for high-traffic areas. Tracked shutters are easy to remove from the window or door, so you can move them out of sight when they are not in use.
